The Scrap Metal Dealers Act 2013 ("the Act") repeals the Scrap Metal Dealers Act 1964 (and linked legislation) and Part 1 of the Vehicle (Crime) Act 2001, creating a revised regulatory regime for scrap metal recycling and vehicle dismantling industries.
The Act incorporates the separate regulatory scheme for motor salvage operators into this new regime. This is to replace the previously overlapping regimes for the vehicle salvage and scrap metal industries with a single regulatory scheme.
There are two types of licence specified in the Act:
All the sites where a licence holder on business as a scrap metal dealer have to be identified, and a site manager has to be named for each site. This licence allows the licence holder to transport scrap metal to and from those sites from any local authority area.
This allows the licence holder to operate as a collector in the area of the issuing local authority. It does not allow the collector to operate in any other local authority area, so a separate licence has to be obtained from each council the collector wishes to operate in. The licence does not authorise the holder to operate a site; to do so they will need a site licence from the relevant local authority.
It should be noted that a dealer can only hold one type of licence in any one local authority area. They have to decide whether they are going to have a site or a mobile licence in any one area. They cannot hold both a site and mobile collector's licence from the same council.
The 2013 Act defines a scrap metal dealer, a site, a mobile collector and scrap metal.
A dealer is defined under s21(2) of the Act as someone carrying on a business which consists wholly or in part of buying or selling scrap metal, whether or not the metal is sold in the form in which it is bought. However a manufacturing business that sells scrap metal created only as a by-product of the processes it uses, or because it has a surplus of materials, is not caught by this definition (see s21(3)).
The definition of scrap metal dealer is deliberately quite widely drawn, and there are no further details provided in the Act or the explanatory notes about who potentially might have to apply for a licence.
Yes. A person cannot carry on business as a scrap metal dealer unless authorised by a Licence issued under the Act.
A person who carries on business as a scrap metal dealer in breach of this is guilty of an offence and is liable on summary conviction to a fine not exceeding level 5 on the standard scale.
(a) Carry on a business which consists wholly or partly in buying or selling scrap metal, whether or not the metal is sold in the form in which it was brought, or
(b) Carry on a business as a motor salvage operator (so far as that does not fall within paragraph (a)).
For the purposes of (a), a person who manufactures articles is not regarded as selling scrap metal if that person sells scrap metal only as a by-product of manufacturing articles or as surplus materials not required for manufacturing them.
For the purposes of (b), a person carries on business as a motor salvage operator if the person carries on a Business which consists of:-
(a) Wholly or partly in recovering salvageable parts from motor vehicles for re-use or sale and subsequently selling or otherwise disposing of the rest of the vehicle for scrap;
(b) Wholly or mainly in buying written-off vehicles and subsequently repairing and reselling them,
(c) Wholly or mainly in buying or selling motor vehicles which are to be the subject (whether immediately or on a subsequent re-sale) of any of the activities mentioned in paragraph (a) or (b), or
(d) Wholly or mainly activities falling within paragraphs (b) and (c).
A "scrap metal dealer" is a person who caries on the business as a scrap metal dealer, whether or not authorised by a licence.
(a) Any old, waste or discarded metal or metallic material, and
(b) Any product, article or assembly which is made from or contains metal and is broken, worn out or regarded by its last holder as having reached the end of its useful life.
But the following are not to be regarded as scrap metal:
(b) Silver, and
(c) Any alloy of which 2 per cent or more by weight is attributable to gold or silver.
Sedgemoor District Council have set out what other documents are required to assist in the determination of an applicant's suitability and they are listed as follows:-;
We will notify you that we are proposing to refuse your application. We will give you 21 days in which to make representations against this; should you wish to make oral representations then we will arrange for the Miscellaneous Licensing Sub-Committee to convene to hear these.
Should the Sub-Committee formally refuse your Licence you may then appeal to the Magistrates' Court, within 21 days.
3 years and lapses; the dealer must renew the Licence.
Under the Act, you are required to notify us of any changes which would materially affect the accuracy of the information you provide to us in the making of your original application, this has to be within 28 days of the changes occurring. You can therefore apply to vary your Licence (there will be a fee charged for this).
The options for variation are as follows:
Should you cease to carry on the business of a scrap metal dealer you must also inform us of that fact within 28 days.
Yes. If you have a Site Licence you must ensure that a copy is displayed at each site identified in the Licence in a prominent place in an area accessible to the public.
If you have a Collector's Licence you must ensure that a copy is displayed on any vehicle that is being used in the course of your business in a manner which enables it to be easily read by a person outside the vehicle.
No. It is an offence under the Act to pay cash for scrap metal.
You can only pay via the below methods:
(a) By a cheque which under section 81A of the Bills of Exchange Act 1992 is not transferable, or
(b) By an electronic transfer of funds (authorised by credit or debit card or otherwise).
The Secretary of State may amend these provisions to permit other methods of payment in which case these Notes of Guidance will be updated accordingly.
The Act states that a scrap metal dealer must record the following information:
(a) The description of the metal, including its type (or types if mixed), form, condition, weight and any marks identifying previous owners or other distinguishing features;
(b) The date and time of its receipt;
(c) If the metal is delivered in or on a vehicle, the registration mark (within the meaning of section 23 of the Vehicle Excise and Registration Act 1994) of the vehicle;
(d) If the metal is received from a person, the full name and address of that person;
(e) If the dealer pays for the metal, the full name of the person who makes the payment acting for the dealer.
If the dealer receives the metal from a person, the dealer must keep a copy of any document which the dealer uses to verify the name or address of that person (see 13 below for acceptable forms of ID).
If the dealer pays for the metal by cheque, the dealer must keep a copy of the cheque.
If the dealer pays for the metal by electronic transfer:
(a) The dealer must keep the receipt identifying the transfer, or
(b) If no receipt identifying the transfer was obtained, the dealer must record particulars identifying the transfer.
If a dealer disposes of scrap metal under a Site Licence the must record the following information:
(a) The description of the metal, including its type (or types if mixed), form and weight;
(b) The date and time of its disposal;
(c) If the disposal is to another person, the full name and address of that person;
(d) If the dealer receives payment for the metal (whether by way of sale or exchange), the price or other consideration received.
If a dealer disposes of scrap metal under a Collector's Licence they must record the following information:
(a) The date and time of the disposal;
(b) If the disposal is to another person, the full name and address of that person.
The dealer must keep the information and other records mentioned above for a period of 3 years beginning with the day on which the metal is received or (as the case may be) disposed of.
A person guilty of an offence under this section is liable on summary conviction to a fine not exceeding level 5 on the standard scale.
Statutory Instrument 2276 / 2013 (The Scrap Metal Dealers Act 2013 Prescribed Documents and Information for Verification of Name and Address Regulations 2013) contains the forms of ID which are acceptable and these are quoted below:
(1) For the purposes of section 11 (3) of the Act, in order to verify a person's name and address, it will be sufficient for the scrap metal dealer to refer to either-
(a) a document listed in paragraph (2) which bears the person's full name, photograph and residential address; or
(b) Both of-
(i) a document listed in paragraph (2) which bears the person's full name, photograph and date of birth, and
(ii) a supporting document listed in paragraph (3) which bears the person's full name and residential address.
(2) The documents which apply for the purposes of regulation 2(1)(a) or (b)(i) are as follows:
(a) a valid United Kingdom passport, within the meaning of section 33(1) of the Immigration Act 1971; or
(b) a valid passport issued by an EEA state; or
(c) a valid Great Britain or Northern Ireland photo-card driving licence; or
(d) a valid UK biometric immigration document, issued in accordance with regulations made under section 5 of the UK Borders Act 2007.
(3) The documents which apply for the purposes of regulation 2(1)(b)(ii) are
(a) a bank or building society statement;
(b) a credit or debit card statement;
(c) a council tax demand letter or statement; or
(d) a utility bill, but not a mobile telephone bill
Provided that the date on which the document in question was issued is not more than three months before the date when the scrap metal is received by the scrap metal dealer.
A Licence is required under the Scrap Metal Dealers Act 2013. Please see forms below.
Current fees and charges can be downloaded from this page under 'Related Documents'. Further details can be obtained by contacting the Licensing Team.
You can make application for a Scrap Dealer's Licence by downloading the form at the bottom of this page or on-line at
In addition to obtaining a licence for the business from the Council, anyone wanting to transport or deal in controlled waste as part of their business or for profit will need to register with the Environment Agency for a Waste Carriers licence.
If you cannot meet the requirements set by the exemptions you would need to apply for an Environmental Permit. Further information is available on the Environment Agency Permitting Guidance page.
The Fees for site and collectors Licences are available here: Scrap Metal Fees 2016 [11.38KB]
Application forms are available below.